Made to your length, from 10 cm Assembled in 1–2 days Free delivery from € 300

Which cable do I need?

A coaxial cable loses part of the signal on its way. How much depends on three things: the cable, the frequency and the length. Thicker cable loses less, higher frequencies lose more, and every metre adds to the loss.

Three classes by diameter

Our cables fall into three classes. Thin cable is flexible and easy to route; thick cable keeps the most signal over long runs but needs more room to bend.

Thin & flexible

Under 7 mm · short jumpers, routers, indoor

Low-loss, medium

7–9 mm · antennas and repeaters up to ~30 m

A rule of thumb for loss

  • Under 3 dB — negligible: more than half of the signal arrives.
  • 3–6 dB — noticeable: a quarter to a half of the signal arrives.
  • Over 6 dB — consider a thicker cable or a shorter run.

The configurator shows the expected loss of your exact cable on every common band, from 800 MHz LTE to 5.8 GHz Wi-Fi, and suggests a thicker cable when the loss gets high.

All cables side by side

Loss in dB per 100 m.
Cable Class Diameter Conductor · jacket 900 MHz 2600 MHz Max length
RG58 Thin & flexible Ø 4.95 mm Cu, PVC 31.3 56.5 30 m
LMR240 Thin & flexible Ø 6.1 mm Cu, PVC 23.2 42.2 50 m
LMR240 Twin Thin & flexible Ø 2 × 6.1 mm Cu, PVC 24.8 43.3 20 m
5D-FB Low-loss, medium Ø 7.5 mm Cu, LSZH 19.1 34.7 50 m
LMR300 Low-loss, medium Ø 7.5 mm Cu, LSZH 19.1 34.7 50 m
LMR400 UF Flexible Thick, lowest loss Ø 10.29 mm Cu, PVC 13.1 23.8 100 m
RG213U Thick, lowest loss Ø 10.3 mm Cu, PVC 22.0 43.8 100 m
RG214U Thick, lowest loss Ø 10.8 mm AgCu, PVC 23.1 47.0 100 m
8D-FB Thick, lowest loss Ø 11.1 mm CCA, LSZH 14.2 28.4 100 m
10D-FB Thick, lowest loss Ø 13.0 mm CCA, LSZH 11.2 20.5 100 m
RG-8X Thin & flexible Ø 6.1 mm Cu, PVC 34.7 64.8 30 m

Ready to build your cable?

Any cable, any two connectors, any length from 10 cm to 100 m — assembled and tested in 1–2 days.

Open the configurator